NexiGo N70 4K Webcam w/ ToF Lightning Autofocus

Step 1: Using the provided cable, plug the USB-C connector into the USB-C port of the webcam.

Step 2: Plug the USB-A connector into an available port on your computer.

• Plug-and-play support will allow your computer to recognize the webcam within a few seconds.
• If your computer does not recognize the webcam, try plugging it into a different USB port or restarting the computer. If this does not help, please contact NexiGo customer support at cs@nexigo.com.

Step 3: Open the app you want to use with the webcam.

• The activity light will turn green when the webcam is in use by an app like Zoom or OBS.
• You may need to select your N70 as the active camera (NexiGo N70 Camera) and its built-in microphones (NexiGo N70 Audio) in the settings of the app you are using.

Step 1. Set the resolution and frame rate to 1080p @ 30fps or lower.

Step 2. Open the NexiGo software, go to the Advanced tab, and find the Zoom option to adjust the digital zoom level.

Connect the camera to any USB 2.0 or USB 3.0port. It will take a few seconds for the camera to be recognized after it is connected to the system. To ensure the camera has been installed correctly on a Windows computer, check under Control Panel > System and Security > Device Manager.

To verify the webcam is connected on a Mac computer, click the Apple Menu (in the top left corner of your screen) and then click About this Mac. Click on System Report from the pop-up window that appears. The System Information window for your Mac will appear. Navigate to the USB section and check if the webcam is listed as a connected device (like the photo below):

The NexiGo webcam captures clear images and can record video at 4K@30fps, or 1080p@60fps in a well-lit environment. The quality of the signal can be affected by low bandwidth availability or insufficient lighting. This can cause the frame rate to drop to 4K@20fps, or 1080p@50fps, or possibly even lower.

Please ensure that the light in your environment isfree of unique tones or intense light sources. Things such as walls / floors / other large-area non-standard light sources, including areas with colored or intense light. In such environments photographed pictures are subjected to color cast due to the lighting impact of these light sources.

For Windows & Mac:
Using the NexiGo Webcam Settings Software, you can adjust the image parameter you want according to your needs.

Note: Download the NexiGo Webcam Settings Software from nexigo.com/software.

Check the video output settings in your video capture software, these may be set to a lower capture format. There are various constraints on the system that could impede the ability to attain a 4K video calling session. They center around processing power (i.e., CPU speed) and available network bandwidth. In all cases, review the requirements from the video calling application. They will guide as to the system performance required as well as the necessary bandwidth.

The webcam cannot support 4K resolution, 60fps, and digital zoom simultaneously. 

• When set to 4K resolution, the frame rate is limitedto 30fps, and digital zoom is disabled.
• 60fps is only available at 1080p resolution without digital zoom. 
• The digital zoom function is only available at 1080p and 30fps.