Elevate your Nintendo Switch handheld gaming with the NexiGo Gripcon nintendo switch handheld controller gripcon. Designed with a non-slip ergonomic grip, this controller ensures comfortable gaming sessions. With 3 thumbstick heights and a full D-pad, you can customize your control options. The controller is compatible with both Switch and Switch OLED models, and it supports 15V charging while playing for uninterrupted gameplay. Enjoy immersive experiences with the 6-axis gyroscope and dual motor vibration, and gain a competitive edge with the 4 extra back buttons. Upgrade your Nintendo Switch handheld gaming with the nintendo switch handheld controller gripcon and enjoy precise control, comfort, and versatility.
1.Please enable the Pro Controller Wired Communication setting in the Switch / Switch OLED console itself. You can do this by going to System Settings > Controller and Sensors > Pro Controller Wired Communication. Set Pro Controller Wired Communication to On. 2.Plug the Switch / Switch OLED console into the controller.
3.After you have plugged the console into the controller, press the A Button on the controller to connect to the console. 4.Finally, please calibrate the Joysticks before first use.
Note: Do not touch the joysticks or other keys when installing and plugging in the console. This prevents automatic calibration. If the joysticks are deviating during use, please unplug the console from the controller and reinsert it, or go to the Settings menu on the console and attempt Joystick Calibration again.
1.Press the HOME Button to return to the console
home page and select System Settings. 2.Select the heading Controllers and Sensors and
then select Calibrate Control Sticks. 3.Follow the instructions as shown below to calibrate
the joysticks. 4.Follow the onscreen prompts to redo the calibration
process if the joystick is not working as expected.
Otherwise, your joystick will now be fully calibrated.
1.Press and hold the + Button and one of the Mapping
Buttons(M1 / M2 / M3 / M4) you wish to map at the
same time to enter mapping mode. The LED Indicator
will flash slowly to indicate that you are in mapping
mode. 2.Press one of the Mappable Buttons you wish to
map, the LED Indicator will fast flash to indicate that
button input is successful. 3.Press one of the Mapping Buttons(M1 / M2 / M3 /
M4) again, the LED Indicator will always be on to
indicate that the process was successful. One of the
Mapping Buttons(M1 / M2 / M3 / M4) now will
have the same functionality as the button you chose
to map to it.