NexiGo B200 Baby Monitor with Camera

Step 1. Fully charge the Monitor, and connect the Camera to power.
Step 2. Place the Monitor within the operating range of the Camera.
Step 3. Press and hold the Power Button for two seconds to turn it on.
Step 4. Set up the Language and Time.
Step 5. Press the OK button to enter the Camera Settings Interface.
Step 6. Select Camera Pairing > Choose the Camera Number > Press OK button> Select Add to begin pairing.
Step 7. Press and hold the Pairing button until a "beep" is heard.
Step 8. The connection is now active.

Go to Menu > More Settings > Camera Settings to enable the Split-Screen Mode. Or use Multi-Camera Cycling Mode to move between each camera at a preset interval.

Step 1. Press and hold the Talk button on the Monitor.
Step 2. Speak into the microphone and your voice will be broadcast to the Baby Camera, and you will be able to hear the sound from the room as well.
Step 3. Release the Talk button to close the connection.

Go to Menu > More Settings to enable the Night Vision Mode. The 【moon】 icon will appear on the screen.

Camera can be moved manually, or you can Pan-Tilt-Zoom on the monitor to see more around your child's room.

You can add up to 4 cameras in total, and the monitor supports Split-Screen Mode to display multiple screens at the same time.

No Wi-Fi or app is needed. This baby monitor utilizes 2.4GHz FHSS technology to transmit signals, which has less interference and 100% security & privacy.

Inside a standard home, the connection range could be of 300-500ft while of up to 1000ft in an open area.

Yes, it comes with the camera wall bracket with which it can be positioned on a corner or on a flat surface.

The Camera unit has to be plugged in to work. The Monitor has a built-in rechargeable battery, so it can be used remotely.

Go to Menu > Sound Activation to enable the VOX Mode. You can adjust the sound detection sensitivity to avoid interference from other noises.