Press to switch the control of different webcam.
Please set the webcam address before using this function.
【*】>【＃】>【F1】: Camera Address No.1
【*】>【＃】>【F2】: Camera Address No.2
【*】>【＃】>【F3】: Camera Address No.3
【*】>【＃】>【F4】: Camera Address No.4
1. Press those 3 buttons in quick succession to set the camera address.
2. If you want to control several N970P webcams with one remote, plug in only one webcam at a time for setup, and repeat the operation to set all the webcams in different camera addresses.
Pan and tilt: Press the arrow buttons to adjust the pan/tilt, press and hold to adjust faster; stop as soon as the key is released.
Back to default: Press the 【HOME】 button.
ZOOM +: Press【ZOOM +】key to zoom in
ZOOM -: Press 【ZOOM -】key to zoom out
Press and hold the keys to adjust zoom in/out faster.
Designed for autofocus webcam to adjust the focus. N970P is a fixed focus webcam, so these buttons have no function.
Save Preset: Press 【SET PRESET】 button, and then press the number key 0-9 to set preset positions.
Note: 10 presets via remote control.
Call Preset: Press a number key 0-9 directly to call a preset position.
Note: The number keys will serve no function until a preset has been programmed.
Clear Preset: Press【CLEAR PRESET】 button, and then press the number key 0-9 to clear preset positions.
Note: Press the # button three times in quick succession to clear all presets.