Yes, it offers 4 customizable vibration levels (Off / 30% / 75% / 100%). To adjust, press and hold the L, ZL, R, and ZR buttons simultaneously for 3 seconds.

TURBO FUNCTION TUTORIAL
Many of the buttons on this controller can be set to turbo functionality. The buttons capable of using the turbo function are: A / B / X / Y / R / L / ZL / ZR. The semi-autoturbo, full-auto turbo, remove, and turbo burst speed settings can be set through the Turbo button.

1. Press and hold the one of the above buttons, then press the Turbo button and release to enable the semi-auto turbo function. The semi-auto turbo function means that if you press one of the A / B / X / Y / R / L / ZL / ZR buttons which you set, you will repeat the button roles. (If you did not activate the semi-auto turbo function, long-pressing a button equals short-pressing a button and the button role actually works for only one time.)

2. Repeat Step 1 again to enable full-auto mode. This makes it so that your selected button will repeat continuously until you disable turbo mode.

3. Repeat Step 1 for the third time to disable turbo mode.

4. Press and hold the Turbo button for 5 seconds to clear all turbo settings.

ADJUSTING THE LIGHT COLOR
Press the Lighting button to switch the color. Choose between red, orange, yellow, green, cyan, blue, purple, and rainbow.

ADJUSTING THE LIGHT MODE
Double-click the Lighting button to change the light mode. Choose between Rainbow Breathing Mode, RGB Cycling Breathing Mode, and lights off.

ADJUSTING THE BRIGHTNESS
1. Hold down the Up / Down button, then press and hold the Lighting (C) button to enter light adjustment mode.

2. While continuing to hold down the Lighting (C) button, tap the Up / Down buttons to increase/decrease the brightness

If your controller is not showing a charging indicator, please follow these steps to perform a quick hardware reset:
Step 1: Locate the small Reset button on the back of the controller.
Step 2: Insert a thin pin or a straightened paperclip into the hole and press down for a few seconds.
This should reset the device and restore normal charging and functionality. If the issue persists and the indicator still won't turn on, please reach out to our Customer Support team immediately, and we will be happy to assist you further.