NexiGo Aurora Pro Ultra Short Throw Laser Projector User Instructions
00:00 - Introduction
00:13 - Aurora Pro Setup
00:52 - Optimal Throw Distance
01:00 - Enabling Air Mouse
01:31 - Accessing Menu Sidebar
01:49 - Fixing Distorted Projection
02:17 - Fixing Blurry Projection
02:24 - Adjusting Screen Size
03:09 - Connecting to Wi-Fi
03:24 - Using Aurora Pro as Bluetooth Speaker
03:50 - Wireless Casting Options
04:15 - Miracast
04:28 - AirPlay
04:48 - DLNA
05:04 - Windows Cast
05:22 - Setting Up Dolby Audio
05:50 - Setting Up Dolby Vision
06:23 - TV Stick Remote Control
06:49 - Playing 3D Content
07:10 - Installing/Uninstalling Apps
08:10 - Eye Protection Mode
08:23 - Firmware Update
08:36 - Restoring Factory Settings
09:00 - Switching Input Sources
09:15 - Automatic Power On/Off with HDMI
10:30 - Low Latency Gaming Setup 10:56 - Gaming in 4K at 120Hz
11:33 - Gaming with Variable Refresh Rate
12:27 - Latency Comparison (1080p vs 4K)
12:48 - Using Aurora Pro with Lights On
13:01 - Need for a Projector Screen?
13:11 - Ceiling Mounting Aurora Pro
What's the throw distance for an exceptional viewing experience?
The throw ratio, or projection ratio, is 0.233:1. This ultra-short throw ratio allows the projector to produce large images even when placed close to the projection surface, making it ideal for use in smaller rooms or spaces that can’t support the longer distance that traditional projectors require.
Yes, you can adjust the image size using the zoom in/out function on the remote control.
The projector offers 2400 Peak Lumens brightness which is much higher than other projectors on the market and brings a much clearer image even if used in daylight. However, for the best visual experience, it is recommended to be used in dark light.
Yes, the projector supports Dolby Vision so you can enjoy stunning HDR content with lifelike colors, brightness, and contrast.
Infrared(IR) Pairing：
There are infrared (IR) sensors at the front center of the projector and on the remote. If you choose to use this method to control the projector, it has a maximum range of 26 feet.
Bluetooth Pairing (Recommended)：
Ensure that the remote is within a few feet of the front of the projector
before pairing. Press and hold the Return and Menu buttons
simultaneously for at least 3s to put the remote control into pairing
mode with the projector. If the pairing is successful, the screen will
show "The Remote is connected".
Note:
If the Bluetooth connection is disabled, you will need to re-pair the remote in order to continue using it via Bluetooth.
Do not place objects in front of the projector's IR sensor. This may prevent the sensor from operating properly.
The IR sensor on the remote, like all IR sensors, can be interfered with by extremely bright light sources. If the remote is not working properly, make sure that there are no bright lights shining on them.
Yes, the Aurora Pro supports 3D playback in various formats, including frame packing, frame sequential, left and right, and top and bottom.
Yes, the Aurora Pro is designed with four ½-inch M4 screw threads, which enable you to hang it from the ceiling using a specialized mounting bracket (not included).
Previous system updates
To ensure your projector is running smoothly and efficiently, make sure it’s updated with the latest firmware.
V1.0.21 (9/22/2022)
Initial version
V1.2.6 (2/17/2023)
Added pop-up verification for public Wi-Fi guest login.
Shortcut menu now has 3D playback and input source settings.
Added Windows cast function for easy screen sharing.
Updated user interface (UI).
Added optional system updates notification setting in General Settings.
Included browser options in the Apps folder.
Added input source icon.
How do I update my projector?
Important Notes:
Please connect your Aurora to the Internet to receive the latest firmware updates.
Please ensure the projector is plugged into a working power outlet.
DO NOT power off or try to use the projector during an update.
The screenshots provided here are for reference only. The actual images that appear on your screen may differ depending on your current firmware.
Update Instructions:
Did you see a pop-up message after your Aurora was connected to the Internet?
Step 1
Click OK on the pop-up message to enter the System Version page. Here you can view the projector's current firmware version and update it if necessary.
Step 2
Click on Version Update and then select Download and install to start the update.
Step 3
Click OK to start the update process. After the update is complete, the projector will restart automatically. Please DO NOT power off or try to use the projector while the update is being installed.
Step 1
On your projector, navigate to Settings > General > System Version. Here you can view the projector's current firmware version and update it if necessary.
Step 2
Click on Version Update and then select Download and install to start the update.
Step 3
Click OK to start the update process. After the update is complete, the projector will restart automatically. Please DO NOT power off or try to use the projector while the update is being installed.
MJPEG/H.264
3840 x 2160@30/25/20/15/10/5fps,
1920 x 1080@60/30/25/20/15/10/5fps,
1280 x 720@60/50/30/25/20/15/10/5fps, etc. YUY2/NV12
1920 x 1080@60/50/30/25/20/15/10/5fps,
1280 x 720@60/50/30/25/20/15/10/5fps, etc.
Resolution
(HDMI Output)
30fps mode
3840 x 2160fps@30/25fps, 1920 x 1080@30/25fps 60fps mode
1920 x 1080@60/50fps, 1280 x 720@60/50fps
Lens
9-layer glass lens, f/2.2 aperture, 4.2 mm focal length
Field of View
D=90°/H=81°/V=55°
Focus Type
Fixed Focus
Focus Range
10" - 90" (0.25m - 2.28m)
Digital Zoom
Up to 10x digital zoom at 4K@30fps
Facial Enhancement
Support
Microphone
Dual noise reduction mics
Mic Pickup Range
Within 32.8ft (10m)
Video Output Port
1 x USB-B, 1 x HDMI
Software
Works with Zoom, Microsoft Teams, Skype for Business, Slack, Webex, and many more
Operating System
Windows 7 (Supports 1080p or lower),
Windows 8.1/10/11 or above macOS 10.10 or above
Hardware
CPU: 2.4 GHz Intel Core 2 Duo processor or better
RAM: 2 GB or more
USB: USB 2.0, USB 3.0(Recommended)
Display
Light Technology
0.47" DMD DLP®
Resolution
3840 x 2160
Light Source
ALPD 4.0®
Brightness
2400 Lumens
Color Gamut
107% BT.2020
FOFO Contrast Ratio
3000:1
3D Display
Yes
Projection
Throw Ratio
0.233:1
Focus
Electric Focus via
Remote Control
Projection Distance
0.33' to 1.44'
Projection Size
80" to 150"
Keystone Correction
Yes (Support 4/8-Point Keystone Correction)
Projection Method
Front, Rear, Front Ceiling, Rear Ceiling
Hardware
RAM
3GB DDR3
ROM
128GB eMMC
Wi-Fi
802.11ax 2.4G / 5G 2T2R WiFi 6
System
Function
Bluetooth
Bluetooth 5.2
HDR10
Yes
MEMC
Yes
Works with Alexa
Yes
Audio
Dolby Atmos
Yes
Speakers
2 x 15W Woofers,
2 x 15W Tweeters
Power
Power Consumption
150W (min) to 420W (max), 280W (normal)
Input
100 - 240V ~ @50/60Hz
Standby Power Consumption
≤0.5W
Noise
≤26dB
Interfaces
HDMI
2 x HDMI 2.1, 1 x HDMI 2.1 (eARC)
USB
3 x USB-A 2.0
Video In
1 x AV 3.5 (3.5mm)
Audio Out
1 x Audio out
LAN Port
1 x LAN
About
Dimensions
21.54 x 4.81 x 16.04 inches (54.71 x 12.22 x 40.75 cm)
Weight
22 LBS (9.98 KG)
Storage Temperature
-4°F-131°F (-20°C-55°C)
Working Temperature
32°F-104°F (0°C-40°C)
Operating Humidity
30%~85%
Liquid error (sections/pf-2ec97e04 line 289): product form must be given a product
