NexiGo Smart WiFi Mini Portable Projector, 4K Supported, Android 9.0, [100 ANSI - Over 3000 Lux], DLP Bluetooth Pico Video Projector, 4-Hours Playtime, Neat Projector, Home Entertainment
Chapters 00:00 Intro 00:17 How do I use the NexiGo Mini Projector?
01:22 Keystone corrections
01:29 Connect the projector to an external speaker
01:55 Wireless Connection Options
01:59 Mirror screen from an iOS device to the projector
02:19 Mirror screen from an Android device to the projector
02:45 Mirror screen from Windows computer to the projector
03:23 Screen cast from phone to the projector
03:35 Use EShare for screen mirroring
04:02 Turn off the projector
Firmware Upgrade Instructions (Online Update):
IMPORTANT:
0: Unless you have issues with the camera, we don't recommend any firmware updates. If you are not sure about if updates are needed, please contact our customer support cs@nexigo.com.
1: DO NOTpower off or try to use the projector during the updating.
Step 1
Navigate Settings > About Us > Online
Update, select the Check For Updates button, and wait for a few minutes for the projector
system to update
Note: Please make sure not to power off or try to use the projector during the updating. The projector will be reset after the software updates, all saved settings will be erased.
Firmware Upgrade Instructions (USB Update):
IMPORTANT:
0: Unless you have issues with the camera, we don't recommend any firmware updates. If you are not sure about if updates are needed, please contact our customer support cs@nexigo.com.
1: DO NOTpower off or try to use the projector during the updating.
Step 1
Navigate Settngs > About Us > Online
Update, select the Check For Updates button, and wait for a few minutes for the projector
system to update
Step 3
Connect the NexiGo N990 4K PTZ Camera to your PC.
Step 4
Run update tool SFWriteTool_AllIC_v30256 and choose your webcam in Devices.
Step 5
Click the Upgrade File and go to where you stored the upgrade firmware and select the file.
Step 6
Click Download to start the update.
Step 7
A: On the home page, select Settings > Projection Settings > Zoom Settings, then press the Left / Right buttons on the remote to zoom in / out.
A: The projected color accuracy will suffer in daylight, so we recommend that you should use the projector in low-light environments for better viewing experience.
A: Yes, NexiGo PJ01 has ±40° auto vertical and manual horizontal keystone correction. When adjusting the horizontal keystoning, go to Settings > Projection Settings to turn off auto keystone correction and adjust manually.
A: You can rotate the Focus Adjustment Wheel on the PJ01 projector to focus the image correctly.
A: PJ01 will automatically switch to a lower brightness mode when it is not charged in order to save battery. If you wish to change the brightness lelvel, please go to Settings > Projection Settings > Brightness Adjustment, then press the Left / Right buttons on the remote to set your desired brightness level.
