Chapters 0:00 Introduction
0:29 How to use the NS53 as a single controller? 1:24 How to use the NS53 in Ergonomic Mode? 1:51 How to use each half as an individual controller? 2:40 How to map the rear button? 4:25 Does it support six-axis gyroscopic motion controls?
4:40 How to reconnect the NS53 controller to the Switch console?
4:49 How to use the NS53 controller to wake up the Switch while it is in Sleep Mode?
4:59 How to reset the controller?
5:13 How to charge the controller?
How do I play Nintendo Switch Sports with NexiGo joypad controller?
A: Press the ML / MR button, and the Player Indicator LEDs will flashslowly to indicate that the left / right Joypad is in mapping mode. Press the ML / MR button and one of the Mappable Buttons you wish to map at the same time, and the left / right Joypad will vibrate for 0.5 seconds to indicate that the mapping for the 3L / 3R button is complete. The Player Indicator LEDs will return to their previous state indicating that the mapping process was successful. The 3L / 3R button now function as the button you chose to map it to.
Note: This controller does not support mapping button combinations.
A: 1. Press the Turbo button and one of the above buttons to enable the semi-auto turbo function on that button. The semi-auto turbo function means if you long press one of the A / B / X / Y / L/ R / ZL/ZR / D-pad buttons, you will repeat the button roles. (If you did not activate the semi-auto turbo function, long-pressing a button equals short-pressing a button and the button role actually works for only one time.) 2. Repeat the above step again to enable full-auto mode. The full-auto turbo function means once you activate the full-auto turbo function, you do not need to press any button, and you are automatically repeating the button role which was set for turbo.
3. Repeat the above step for the third time to disable the Turbo function.
A: 1. Press the Left Turbo button and pull the Left Joystick upward / downward at the same time to increase / decrease the haptic feedback vibration strength.
2. Press the Right Turbo button and pull the Right Joystick upward / downward at the same time to increase / decrease the haptic feedback vibration strength.
3. After choosing a vibration level the motor will vibrate at the chosen level for 0.5 seconds to indicate that choice.
4. There are five adjustment levels for the haptic feedback: off / weak/ medium / strong / boost.
A: Some games do not require abxy buttons. You can use them as two individual joycons.
A: Sorry, it can't.
A: For RGB lighting, you can long press the Turbo button and single press the joystick to change the RGB lights.
For special lighting, you can long press the Turbo button and double press the joystick to change the special lights. (Move to 3min53s to see the detail operation)