Chapters:
0:00 Introduction.
0:17 How do I connect it to my Switch?
1:08 How do I set the RGB Lights?
2:03 How do I enter Turbo Mode?
2:31 Does it support motion controls?
2:40 How do I adjust the vibration strength?
2:59 Can I use it to wake up the Switch?
3:11 How do I connect it to my PC?
3:35 How do I connect it to my smartphone?
Yes, the controller is compatible with Nintendo Switch, Switch Lite and Switch OLED, not suppporting iOS/Android/Windows or other devices.
Yes, there are four adjustment levels for the haptic feedback: Off /30%/75%/100% and your can adjust by:
1. Press the Turbo button and push the joystick backward at the same time to decrease the haptic feedback vibration strength.
2. Press the Turbo button and push the joystick forward at the same time to increase the haptic feedback vibration strength.
1. Press the Turbo button and one of the A / B / X / Y / L/ R / ZL/ZR / D-pad buttons to enable the semi-auto turbo function on that button. The semi-auto turbo function means if you long press one of the A / B / X / Y / L/ R / ZL/ZR / D-pad buttons, you will repeat the button roles. (If you did not activate the semi-auto turbo function, long-pressing a button equals short-pressing a button and the button role actually works for only one time.)
2. Repeat the above step again to enable full-auto mode. The full-auto turbo function means once you activate the full-auto turbo function, you do not need to press any button, and you are automatically repeating the button role which was set for turbo.
3. Repeat the above step for the third time to disable the Turbo function.
For RGB lighting, you can long press the Turbo button and single press the joystick to change the RGB lights.
For special lighting, you can long press the Turbo button and double press the joystick to change the special lights.
For brightness adjusting, you can long press the Turbo button and the joystick at the same time to increase/decrease the brightness.
(Move to 53s to see the detail operation)
Unless you have issues with the camera, we don't recommend any firmware updates. If you are not sure about if updates are needed, please contact our customer support cs@nexigo.com.
