The ideal throw distance depends on the screen size that you want. Please refer to the table below for measurements based on your ideal screen size.
The throw ratio, or projection ratio, is 0.21:1. With this ultra-short throw ratio, the projector can produce huge images at a short distance from your wall or screen.
This is ideal in smaller rooms or spaces that can’t support the longer distance required by traditional projectors.
Yes, the projector supports both Dolby Vision and HDR10+, so you can enjoy stunning HDR content with lifelike colors, brightness, and contrast.
Yes, the Aurora Pro MKII supports 3D playback in various formats, including frame packing, frame sequential, left and right, and top and bottom.
Yes, the Aurora Pro MKII is designed with four ½-inch M4 screw threads, which enable you to hang it from the ceiling using a specialized mounting bracket (not included).
Yes, you can adjust the image size using the zoom in/out function on the remote control.
The projector offers 2400 Peak Lumens brightness which is much higher than other projectors on the market and brings a much clearer image even if used in daylight. However, for the best visual experience, it is recommended to be used in dark light.
Infrared(IR) Pairing：
There are infrared (IR) sensors at the front center of the projector and on the remote. If you choose to use this method to control the projector, it has a maximum range of 26 feet.
Bluetooth Pairing (Recommended)：
Ensure that the remote is within a few feet of the front of the projector before pairing. Press and hold the Return and Menu buttons simultaneously for at least 3s to put the remote control into pairing mode with the projector. If the pairing is successful, the screen will show "The Remote is connected".
Note:
- If the Bluetooth connection is disabled, you will need to re-pair the remote in order to continue using it via Bluetooth.
- Do not place objects in front of the projector's IR sensor. This may prevent the sensor from operating properly.
- The IR sensor on the remote, like all IR sensors, can be interfered with by extremely bright light sources. If the remote is not working properly, make sure that there are no bright lights shining on them.
Before you can install apps using APK files, you must enable installation from unknown sources.
To do this, go to Settings > General > Unknown Sources > On.
Copy an APK file from a trusted website onto a USB drive (FAT32 format), and plug the flash drive into the Aurora Pro MKII.
Go to Input Source > USB > USB Drive > APK to open the file. Select Install to begin installing the APK file.
Image Sensor
1/1.8" Sony® STARVIS 2 back-illuminated sensor
Resolution
(USB 3.0 Output)
MJPEG/H.264
3840 x 2160@30/25/20/15/10/5fps,
1920 x 1080@60/30/25/20/15/10/5fps,
1280 x 720@60/50/30/25/20/15/10/5fps, etc.
YUY2/NV12
1920 x 1080@60/50/30/25/20/15/10/5fps,
1280 x 720@60/50/30/25/20/15/10/5fps, etc.
Resolution
(HDMI Output)
30fps mode
3840 x 2160fps@30/25fps, 1920 x 1080@30/25fps
60fps mode
1920 x 1080@60/50fps, 1280 x 720@60/50fps
Lens
9-layer glass lens, f/2.2 aperture, 4.2 mm focal length
Field of View
D=90°/H=81°/V=55°
Focus Type
Fixed Focus
Focus Range
10" - 90" (0.25m - 2.28m)
Digital Zoom
Up to 10x digital zoom at 4K@30fps
Facial Enhancement
Support
Microphone
Dual noise reduction mics
Mic Pickup Range
Within 32.8ft (10m)
Video Output Port
1 x USB-B, 1 x HDMI
Software
Works with Zoom, Microsoft Teams, Skype for Business, Slack, Webex, and many more
Operating System
Windows 7 (Supports 1080p or lower),
Windows 8.1/10/11 or above
macOS 10.10 or above
Hardware
CPU: 2.4 GHz Intel Core 2 Duo processor or better
RAM: 2 GB or more
USB: USB 2.0, USB 3.0(Recommended)
Projection System
Projection Tech: ALPD® 5.0
Light Source: ALPD® 5.0 ProVision Tri-Color Laser
Resolution: 4K UHD (3840 x 2160)
Brightness: 2400 Lumens1
Color Gamut: 107% BT.2020
FOFO Contrast Ratio: 4,000:1
Dynamic Laser Dimming Contrast Ratio: >30,000:1
Projection Size: 80" to 150"
Input Lag: 4.2 ms ~ 8 ms2
Throw Ratio: 0.21:1
RAM / EMMC: 3G / 128G
Support Format: Dolby Vision, HDR10+, HDR10, HLG
3D: Active 3D
MEMC: Yes
Lamp Life: 30,000 Hours3
General
Dimensions: 21.54 x 4.81 x 16.04 in. / 54.71 x 12.22 x 40.75 cm
Weight: 22 lbs / 9.98 kg
Working Temperature: 32~104 °F / 0-40 ℃
Storage Temperature: -4~131 °F / -20~55 ℃
Operating Humidity: 30%~85%
Audio
Speakers: 2 x 15 W Woofers, 2 x 15 W Tweeters
Dolby Atmos: Yes
DTS HD: Yes
Bluetooth Speaker Mode: Yes
Noise: ≤ 26 dB4
Connectivity
HDMI Ports: 3 x HDMI 2.1 (HDMI 1 supports eARC, HDMI 2 recommended for gaming, all support CEC)
USB: 3 x USB-A
Audio Out: 1 x Line Out
Digital Audio Output: 1 x S/PDIF
Ethernet: 1 x RJ45
Wi-Fi: Wi-Fi 6
Bluetooth: 5.2
Screen Cast: Yes
Backlit Remote: IR & Bluetooth Dual Mode
Power
Power Supply (AC): 100-240 V, 50/60 Hz
Power Consumption: 70 W (min) – 420 W (max), 280 W (normal)
Standby Mode: ≤0.5 W
Smart AI Screen Adaption Technology
Auto Focus: Yes
Auto Keystone Correction: Yes
Intelligent Obstacle Avoidance: Yes
Auto Screen Fit: Yes
Intelligent Eye Protection: Yes
Adaptive Brightness: Yes
Product Notes:
- 1. The listed 2400 ANSI Lumens, tested by NexiGo Lab, represent the projector's highest brightness, which may vary due to test conditions and unit variations.
- 2. The input lag 4.2ms to 8ms was tested under 1080p@240Hz in low latency mode. At 4K@60Hz, it measures 17.6ms. The data comes from the NexiGo lab. Results may vary depending on different testing environments, conditions, and the product being evaluated.
- 3. The light source's theoretical lifespan is 30,000 hours, though actual lifespan may differ based on environmental conditions, usage habits, and the selected mode.
- 4. Measured under an ambient temperature of 25°C with a 1-meter distance from the machine. Results may vary based on different testing environments, conditions, and the product being evaluated. This data comes from the NexiGo lab.