You can view 3D content from a distance of 6.5 to 19.7 feet from the projector.
Tap the power button to switch between left-to-right and right-to-left image sequencing.
We recommend charging them at least once every six months, even if you haven't used them. Clean the lenses with a clean, soft microfiber cloth. Avoid using chemical cleansers or liquids containing alcohol to prevent damage to the lenses.
1. Weak Signal: Stay within 19.7 feet for a stable 3D signal. Issues with the 3D signal can cause left-right eye mode switching.
2. Low Battery: Insufficient battery levels can cause irregular switching between left and right eye modes.
Unless you have issues with the camera, we don't recommend any firmware updates. If you are not sure about if updates are needed, please contact our customer support cs@nexigo.com.
The volume is relative to your distance from the projector. For example, when you're 1.6 feet away from the projector, the volume is 39 decibels. You can also adjust the projector's loud from 1 to 10 levels.
Yes, it is compatible with external Bluetooth devices. When using an external Bluetooth device, switch the Wi-Fi from 2.4G to 5G so that the device syncs properly with the video.
Go into Settings > Projection > Zoom Adjust while playing the video. Press the “Up” or “Down” button on the remote to zoom in / zoom out.
Check if the projector is focused properly. Rotate the adjustment wheel left or right to adjust the focus.
1. Press down on the dust cover; it will pop right out. Remove the dust cover.
2. Clean the dust cover holder with a clean, dry cloth and then put it back in place.
We suggest cleaning it monthly to prolong the life of your projector.
Imaging Technology: LCD
Light Source: LED
Max Supported Resolution: 4096 x 2176 (Local video playback)
Focusing Mode: Manual Operation
Keystone: ±30° Auto vertical; ±20° Manual horizontal
Projection Distance: 4.72 - 30.18ft
Projection Size: 50 - 300 in
Aspect Ratio: 16:9/4:3
Projection Ratio: 1.47:1
Power Input: AC 90-260V
Integrated Watt Use: 160W
Input Ports: HDMI x 2, USB x 2, AV x 1
Output Port: 3.5mm audio jack x 1
LAN Port: RJ45 x 1
Speakers: 10W x 2
